Quote:
Originally Posted by Yamamaya42
you will have to work out why you are losing the +225V at the point of the bleeders to the point of the 1k resistor r185, where you saw the negative voltage. SOMETHING in the red wiring from the two points is messed up.  |
You are correct and I got it! All the voltages are now correct on the pins of all 3 tubes and the speaker makes a whisper of a crackle when I touch the pins of the audio output tube with the meter probe! Can't believe it nor can I tell you exactly what it was. I just went through the schematic and ran down the voltage of every wire and made some changes as to how I had wired the electrolytic caps. Amazing and at the 11th hour. Thank you so much for your help and advice. Now I can go on vacation with a smile on my face
07-08-2022, 11:36 PM
Threaded Mode