Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Solid State CRT Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 04-15-2023, 08:21 PM
zchrisz1986 zchrisz1986 is offline
VideoKarma Member
 
Join Date: Jan 2020
Posts: 16
1986 Fisher television

hi all, i finally found a Fisher PC-420 television i've been hunting for and it has some issues as expected.

the tv has what looks like barrel distortion the corners are pulled in on all 4 sides. also has some lines at the top of the screen that look like vertical comb over.

the vertical/PCC control board is separate from the mainboard. it has two electrolytic capacitors and a film capacitor. all were good but i replaced anyways. it uses a C2168 and A958 transistor which all check out. it appears the transistors are getting ~27 volts and the board itself is getting 89-90Volts from the mainboard.

the PCC transistor is okay as well.

i do not have a service manual for this TV and cannot find one. i'm not an expert in CRT's but i have some electronic knowledge.

anything else i should look for?

thanks
Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:21 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.