Zenith G2952 "St Regis" porthole restoration

[bandersen]

Thanks. I missed the button switch.

Yes, the 16DP4 fits. They are the same size and deflection angle. 16DP4 is a recommended replacement with the 16EP4.
Room isn't the real challenge though.
The HV metal bar on ceramic insulators needs to be removed and replaced with something that can support the glass CRT at the right height so everything lines up.
I suppose something could be fabricated from wood. Then you'd need to rig up a strap the hold it down.

That aside, I suspect the 16DP4 is even harder to find than a 16EP4.