|
|
|
#11
10-07-2024, 04:32 PM
|
|||
|
|||
|
NO do not remove the stuff from the top. Remove any plugs , wires etc. Remove the loading mechanism.. should be a couple of screws. Now you should see 3 or 4 screws holding the whole mechanism to the plastic frame. These should be pretty large screws. Now lift the whole mechanism out and flip it over carefully on a towel or something soft. Now you can get to the mode switch and mode belt.
The SM that I downloaded is missing parts of the exploded views. I'm guessing yours is the same. Try this manual. I believe the mechanism is the same as yours.... https://freeservicemanuals.info/en/s...950E/HRD950EG/ Last edited by redk9258; 10-08-2024 at 05:09 AM. 
|
|
|
Threaded Mode