|
|
|
#1
01-04-2026, 11:50 AM
|
||||
|
||||
|
Best Way to Disassemble
After sorting through the spaghetti wiring around the controls of the Avante, I managed to disconnect and remove the entire assembly that contains the remote control board. However, after looking it over, I see no way of cleanly separating the board from the cluster so I can check the resistors. Anyone here have experience with this that can give me some pointers on how to do it with out desoldering multiple wires and resistors to separate the board from the other boards?
The remote board is on the bottom circuit board. I see one screw and one plastic post, but that seems easy....... It's the connections to the upper board and the channel motor that looks like a pain. Pics attached. If a more detailed pic of given area is needed, let me know.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650 
|
|
|
Threaded Mode