Predicta has raster, sound, but no picture

[wcarroll]

Looks like height and lin controls are misadjusted.

Readjusted the height and vert. lin. pots. Things look much better now. Also cleaned the tuner and the tube sockets. This helped with the overall performance of the set.

The picture still "rolls"... If I adjust the vertical control, it will stop rolling for a few seconds, but always continues to roll. Is this a problem typically caused in the vertical output section?

Getting ready to order some orange drops... Looks like a real pain to change the caps on the pc board. A previous tech soldered most of them to the leads of the original caps. I can see why he did this! It's nearly impossible to get to many areas on the pc board from underneath!