|
To save some time and effort, strip back some insulation on the broken wire and solder it next to the connector. If you are careful, try to cut back on that pink fiberglass disk behind the socket with a cutting tip of a dremel tool to get at the terminal. Changing the entire socket for 1 wire shouldnt be nessisary.
__________________
I tolerate the present by living in the past...
To see drh4683's photo page, click here
To see drh4683's youtube page, click here
Last edited by drh4683; 12-25-2003 at 07:23 PM.
|
12-25-2003, 07:19 PM
Hybrid Mode
