![]() |
|
|
|
#1
|
||||
|
||||
|
Quote:
![]() Is there a PAL delay? There is a hue control, i see.
__________________
<< Hi Gianni! By the way, no need to apologize for your English, you speak 3 languages! __________________ John Folsom >> |
|
#2
|
||||
|
||||
|
There is a coil that will allow you to adjust the hue range. Set the hue control to mid position and adjust the coil for natural flesh tones. The location of the coil should be identified on the schematic. That's a great picture by the way. That's a lot like the way mine looks. I love the deep reds these sets produce.
__________________
Just look at those channels whiz on by. - Fred Sanford |
|
#3
|
||||
|
||||
|
Hue control
Hi Gianni, the set has a tint control (useless with our Pal system) but no chroma delay line. Hello compucat, thank you for your advice! Do you remember what the coil you mention is? The flesh tone is achieved only with the control fully counterclockwise. Turning it even just slightly makes flesh tones go completely off (blue skin tones). I think I also need to replace few tubes here and there... You're right. The reds are deep,really amazing!
|
|
#4
|
||||
|
||||
|
Interestingly, this set has no PVA cataracts...
Francesco |
|
#5
|
||||
|
||||
|
Quote:
- Eckhard |
| Audiokarma |
![]() |
| Thread Tools | |
| Display Modes | |
|
|