Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 07-18-2007, 01:25 AM
Tony V's Avatar
Tony V Tony V is offline
VideoKarma Member
 
Join Date: Feb 2003
Location: Brookneal, VA
Posts: 892
Hi Michael,
Parts for the radio show up from time to time on Ebay as some either keep the cabinet and repurpose it or discard the cabinet because of space. The guts and trim then usually ends up on there if your lucky. The good thing is that you have the two hardest to find pieces...the tv and radio chassis. The tv tube is a 10BP4A. There are two different changers that these had in them. One was a rare one with a metal tonearm with a clear plastic head on it and the other was a generic single pusher style changer with a bakelite tonearm. Both were 78rpm only changers. Best way to do the search is go to collectables and then to radio/tv/phonograph/phone. Look in the tv treasures topic on here and you'll find an auction that just ended on Ebay where it had the same identical tv just in a table model that you can use as reference. Farnsworth radio/phono combos are pretty common on Ebay and you should find something that resembles your radio and phono portion to use as reference and you can search from there. I've only seen one of these with the radio/phono and tv in one unit. If you have the space i think it would be worth restoring.
-Tony
Reply With Quote
  #2  
Old 07-18-2007, 07:02 AM
zenith porthole's Avatar
zenith porthole zenith porthole is offline
running out of space
 
Join Date: Mar 2005
Location: windsor, ontario, canada
Posts: 29
Thanks Tony!

The tv chassis appears to have been recapped recently, and the flyback doesn't show signs of being cooked, which is promising. I haven't had a chance to open up the radio chassis yet. Once I hunt down the schematics for this set I plan to do a full cosmetic and electronic restoration. I have an early 50's 3 speed changer that I may install for conveinience, if it fits, until I find the original. Thank you very much for your input!
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:11 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.