![]() |
|
|
|
#1
|
||||
|
||||
|
No...the focus voltage like Andy said is 5 to 6 kv. I don't remember what the pin # is on a round tube but there is a gap between the focus pins and other pins.
The HV ground is the outer graphite coated shell of the tube. The 23 kv HV input is the snap-in connector on the side of the tube. Last edited by Chad Hauris; 04-06-2004 at 06:15 AM. |
![]() |
| Thread Tools | |
| Display Modes | |
|
|