|
The Ram X045 is a direct replacement for it. I don't have a sub book on the other two. Some one here can sub it for you. Great people here and they help alot. Seems like all you would need is a tube socket,tube and anode lead.The replace -ment flybacks have the filament leads on them. I'm sure you have a couple resistors that go on the bottom of the tube socket. You need a diagram of it for sure. The hv rect tube will probably be a 1B3 OR 1X2. Not sure which on that set. Hope this helps some. May have some type of doorknob capacitor off the anode wire also.
Best Of Luck,
Don
|
04-02-2008, 02:49 PM
Hybrid Mode
