Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 05-19-2008, 11:16 PM
wkand's Avatar
wkand wkand is offline
VideoKarma Member
 
Join Date: Oct 2005
Location: Everett WA
Posts: 262
Would an outfit like Moyer still have a Crosley fly? Wow, they musta bought a lot of NOS?
Reply With Quote
  #2  
Old 05-20-2008, 12:08 AM
fsjonsey's Avatar
fsjonsey fsjonsey is offline
Living The Draper Ethos
 
Join Date: Jul 2006
Location: Northeast Ohio
Posts: 539
The wax coating is peeling off of the flyback on my Zenith bugeye. The fly doesn't get very hot, so I'm thinking that this may have occurred when the set was being played in the antique mall, for hours on end, without being recapped. Should I coat the fly in silicone or some other insulator?
__________________
This device isn't a spaceship, it's a time machine. It goes backwards, and forwards... it takes us to a place where we ache to go again.
Reply With Quote
  #3  
Old 05-20-2008, 07:56 AM
roundscreen roundscreen is offline
VideoKarma Member
 
Join Date: Oct 2003
Location: buffalo ny
Posts: 377
Quote:
Originally Posted by fsjonsey View Post
The wax coating is peeling off of the flyback on my Zenith bugeye. The fly doesn't get very hot, so I'm thinking that this may have occurred when the set was being played in the antique mall, for hours on end, without being recapped. Should I coat the fly in silicone or some other insulator?
I use silicone rubber that you can find at radio shack. Discharge the crt just to be safe and clean the dust and dirt off the flyback before you apply it. Silicone rubber has a nasty smell when you first put it on but after it cures it will go away.
Ed
Reply With Quote
  #4  
Old 05-20-2008, 09:04 AM
Old1625's Avatar
Old1625 Old1625 is offline
VideoKarma Member
 
Join Date: Jan 2008
Location: Western MA
Posts: 426
Quote:
Originally Posted by roundscreen View Post
I use silicone rubber that you can find at radio shack. Discharge the crt just to be safe and clean the dust and dirt off the flyback before you apply it. Silicone rubber has a nasty smell when you first put it on but after it cures it will go away.
Ed
Good tip! I've used rubber cement on one or two in the dim dark past, and have also used "corona dope" but the hazard with either is that it needs several days of curing time before the set can be operated. Otherwise the flyback will burst into flames.

If the smell of the silicon rubber is offensive one might try the sealant made for repairing leaky fish tanks. Such can be had at a pet supply store in the aquarium department. It is far less malodorous.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:52 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.