Any Ham Radio Operators Here

[electronjohn]

Similost: Cost CAN be a factor in the ham hobby...there's transceivers on the market that'll run you about the same as a new Chevy Aveo...or entry level models from some of the same manufacturers that'll set you back a little over $500. Then there's the subject of used gear: fairly recent models from the big names like Icom, Yaesu, etc. that'll perform fine and cost 50-75% of new. (Seems some hams get afflicted with "upgradeitis" too!) The vintage route can run both ways...you can buy a good used car for the price of a mint set of Collins "S" line gear...or you can find lesser-known pieces for relatively small money. Here's my example:
The vintage SSB station I'll be setting up (National 200 transceiver & power supply) has set me back $175...I'll need to get a manual. so there's another $25 or so. Antenna? I'll be erecting a G5RV...a wideband dipole named after the British ham who helped popularize it. I could homebrew...but a factory-built antenna is only $45. Oh...I need an antenna tuner, too...to get an optimum match between transceiver and antenna. Since I won't be running a kilowatt (yet!), I'm trying to pick one up used for about $100. If I have to go new, then make it $150 or so. So...complete ham station for around $400.
The vintage AM station is a different story:
Knight-Kit T-60 transmitter. $49.95 in hard-earned, honest-to-gosh 1965 paper route dollars. The problem? To use it I'll need either a 1) VFO, to alllow operation on a variety of frequencies...and a Knight-Kit VFO to match the T-60 seems to be a rare bird. or 2) a bunch of crystals...particularly those on the frequencies set aside by convention for AM operation. Rare birds as well. The receiver? 1947 vintage RME-45. $25 garage sale find that'll perform well with a recap. so, the AM station will probably be a little tougher to set up than the vintage SSB rig. But, just like vintage audio...the hunt is a big part of the pleasure!