![]() |
|
|
|
#1
|
||||
|
||||
|
That particular tube, yes, it could. Some of the battery powered VOMs use a 9V battery, for example.
__________________
Summer's here and the time is right. |
|
#2
|
|||
|
|||
|
I think the series resistance of the meter and the meter movement would limit the current to far less than a quarter amp.
|
|
#3
|
||||
|
||||
|
A VOM only puts out current when it is measuring resistance. Since the circuit must be de-energized when measuring resistance, and you need a source of current in order to measure the voltage drop across the resistor, the VOM/VTVM/DVM/DMM provides it.
The amount of current used is miniscule, and it's highly unlikely you could cause damage with it, unless you're trying to measure continuity through your PC's chipsets. The battery used to power the multimeter is NOT passing that full voltage through the probes.
__________________
I may be growing older, but I refuse to grow up. |
![]() |
| Thread Tools | |
| Display Modes | |
|
|