Show us your vintage B&W sets!

[Carmine]

This is what I can add to the Briggs story, in appreciation for those great RCA TV pictures!

Here's a photo of the old Briggs factory located at Mack & St. Jean on the east side of Detroit. The Photo was taken in 1994, just before the plant was torn down. However, if you notice in the right corner of the picture, you'll see some modern Chrysler signage. That's because Chrysler built a million-square-foot addition to the plant in 1974 (This plant was also known as Mack Stamping.) The older parts of the plant fell out of use in the 70s, until the old section was eventually walled off.

In the early 90s, Chrysler was looking for someplace to build a new "niche" car, with a team concept. This car was the Viper, and I was part of that original team. The "new" mack ave. plant was spiffed up, (we actually called it New Mack) and used for this purpose. The new section is to the right, outside of the picture. Viper production moved out in 1996, and into a much smaller factory. The old building was actually "ground-up" into cement dust, and used to build a modern factory, known today as Mack Engine I (home of the 4.7L V8).

As you know Briggs was a body-builder for many different manufacturers, but by the 50s, mostly Imperial, Chrysler, Dodge, DeSoto, Plymouth and Packard. In fact, my grandfather who retired from Chrysler in 1981 after 34 years began working for Briggs at this factory after returning from WWII. During WWII, my grandmother worked in this plant, riveting airplane wings. My grandfather is in this picture,

When Chrysler purchased Briggs, they also received the rights to the LeBaron name, and the rest is history.