|
I know that convergence is a sore point on my CTC-5. I can get it halfway decent with a lot of work but then the next time I turn it on it looks terrible again. That can be blamed on the DC circuit they used, from what I've read. I've thought about running the set through a variac so I could keep at least that voltage constant. Not sure if that would be good enough. Trouble is that my Iso-Tap is too small for the current draw of this set. Not sure what the rating of my old variac is.
__________________
Bryan
|
09-27-2009, 09:16 PM
Hybrid Mode
