|
|
|
#34
10-03-2009, 01:50 AM
|
||||
|
||||
|
Here's a tip if you find a set that hasn't been powered up in a long time.
This 10BP4 showed 0 emission at first. That's pretty much how all my 10BP4s have tested at first. Let them run for an hour at least before considering them dead or weak. Running for a while @7 V can help too. Try this before trying to rejuvenate them. Sitting around for a few decades seems to put them to sleep. Here's this one after 30 min @. After ran hour it was into the green  
Last edited by bandersen; 10-03-2009 at 02:33 AM. 
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode