Need help with 1963 Zenith Roundie Convergence.

[andy]

---

[classicradios]

Not sure which control is for tint. Here are a few shots when the "Adjust for Fleshtone" knob is turned to it's extremes and then adjusted for best fleshtone. The blue and Green gain controls are both set to 3/4 full turns. Notice the small red/blue/green dots on the zoomed photo? I notice 3 sets of them going vertical down the screen.

[zenithfan1]

Originally Posted by classicradios

Not sure which control is for tint. Here are a few shots when the "Adjust for Fleshtone" knob is turned to it's extremes and then adjusted for best fleshtone. The blue and Green gain controls are both set to 3/4 full turns. Notice the small red/blue/green dots on the zoomed photo? I notice 3 sets of them going vertical down the screen.

The labels for knob location are inside the door, you are adjusting the tint when you speak of the fleshtone knob. Those dots are Macrovision from your DVD player, it is covered in several other threads. It needs the chroma circuits aligned, I bet it drifted again. Grab that cloverleaf and a cross hatch generator and we'll walk you through it.

[classicradios]

Ah Macrovision, I should have known. I'm using a Sima macrovision scrubber for the video, Guess the signal is getting thru slightly. Any thoughts on a decent affordable cross hatch generator? Heathkit?

Originally Posted by zenithfan1

The labels for knob location are inside the door, you are adjusting the tint when you speak of the fleshtone knob. Those dots are Macrovision from your DVD player, it is covered in several other threads. It needs the chroma circuits aligned, I bet it drifted again. Grab that cloverleaf and a cross hatch generator and we'll walk you through it.