![]() |
|
#24
|
||||
|
||||
|
Quote:
![]() I've been examining the finish more closely and it is weird. I think leadlike is right - some sort of filler and stain. I found a worn area where you can see 3 distinct layers. Wood, pinkish/white and a yellowish top layer. That topmost layer may have yellowed with age. Hard to say. I hope I can just touch it up a little with oil paint and clearcoat it with lacquer to protect it. ![]() I took a closer look at another blond set that is supposedly Korina wood It sure looks like the same type of filler/stain surface though. Why use Korina if you're just gonna cover it up ? Anyhow, the Sentinel is in fantastic shape so I'll use it for my benchmark of what it should look like. ![]() Switching topics - here's the lower chassis with a huge coke bottle 5U4. All the tubes test good ![]() ![]() Should I be concerned about the wax oozing out of the main power transformer? I've seen melted wax in several areas of this set. Perhaps it spent some time in a really warm environment? Would it be worth opening up that xfrmr and repacking the wax? ![]() A little wipe down with mild phosphoric acid cleaned it right up. Stinky but not too messy at all.
|
| Thread Tools | |
| Display Modes | |
|
|