Blonder Tongue agile modulator settings

[bandersen]

Hi Phil,

Nope, I don't have a pull-out card. I'd love a photo.

I couldn't find a decent piece of coax so I just used a little bit of wire to jumper that IF IN/OUT.
Bingo I'm broadcasting

Range seems good, but the signal is noisy. I'm hoping that due to my crude hookup. I'll keep hunting for a sort length of coax with the right connectors.

[Phil Nelson]

Here's a photo of the card.

http://antiqueradio.org/art/temp/BTCard.jpg

Peering back at your photo, it looks like I have an extra set of DIP switches. I believe the 550 in the model number means that mine can reach higher frequencies than the 450. If I were designing this stuff, I'd make the two models compatible so that the same settings would work for lower frequencies that they share. But maybe that's expecting too much.

I haven't tried looking for an owner's manual. Some companies put all of their manuals online.

Phil