I've been blessed!

[Tomcomm]

Wayne....Very good cross-hatch conversion except for the blue horizontal sagging uniformly at both sides like there was no horizontal correction at all? If you disconnect the horz coil leads you should move the entire blue line up and down by applying a relative low voltage DC. It should act just like the static magnet rotation. If no movement, bad coil. I checked the CTC5 schematic and it shows independent horz and vert coils on a common form. My CTC2B is the same way, but the CTC4 has only a single coil fed with a complex H/V waveform. Too bad, I still have my CTC4 convergence assembly I'd send but it wouldn't work for you.

The Bing Crosby Christmas picture has great color, reds are sensational! That 21FB or 21FJ really pumps color, are you sure you still want to run a 21AX if you ever get a good one, and always wonder if and when it goes to air? I'd stay with what you've got.........Tom