Bendix

[Charlie]

I figured there had to be a mistake in there somewhere. There was nothing really left to replace. There might be a couple of resistors in there that are still original. So I decided to go back and recheck everything again and found those two values swapped around. Much of my work was done late at night while I was getting tired. Being tired means I should put down the iron and go to bed... not make more coffee and try to stretch it out longer.

The verticle section was real fun to replace as sooo many caps and resistors were shoved into the same corner and all connected to a 10-section terminal strip. I was suprised that I didn't get that all mixed up.