|
|
|
#36
03-28-2010, 01:13 PM
|
||||
|
||||
|
This may be a silly question, do you have a scope? You should be able to pin down where the horiz is losing itself. I'd make sure the takeoff point at the sync seperator is good/stable first as a point of reference.
Are you able to work with the chassis out of the set, attached? I've done this before with my '16, had to prop it up from the floor vertically and I made an extension lead for the HV. The tuner bracket assembly will mount by the A/C plug, fastened by two 1/4" hex screws. 
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode