|
|
|
|
|
#1
04-08-2010, 05:40 PM
|
|||
|
|||
|
besides not being able to find this setup on the schematic i am concerned that it may not be orig to the unit based on bridging the two sections together. I figure if the factory wanted a two section cap it would have come that way.
|
|
#2
04-08-2010, 05:43 PM
|
|||
|
|||
|
of course the other problem is the schematic has a 9a/b pos can cap but I cant for the life of me find the b section on the schematic. I have already come across a miss marked cathode bypass cap (+ to ground) so my confidence in the schematic is not the highest.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
