|
|
|
#23
05-04-2010, 12:13 PM
|
|||
|
|||
|
for starters you still need to turn the brightness down berore you burn the screen.
If it has paper caps you will need to replace them, no point in trying it any more until you do that. Next would be to check the electros esp any that are cathode bypass in the vert osc circuit. You could also check for continuity of the yoke and windings of the vert out transformer, but paper caps are 1st. 
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode