|
|
|
|
|
#1
05-17-2010, 02:36 PM
|
||||
|
||||
|
If you need needles or a new cartridge, the folks at Canadian Astatic (I have no connection, just have bought from them) are very helpful. You can send the model number of your set and all the numbers off the cartridge and they can match it from their vast store of information and parts. Upgrading to a magnetic (with preamp) might be possible, but depending on the capabilities of the changer, tracking at as low a force that you'd like might not work. Changers generally take more tracking force than manual turntables because they are dragging around all of that mechanical baggage to operate the changing mechanism.
http://www.canadianastatic.com/
__________________
Reece Perfection is hard to reach with a screwdriver. 
|
|
#2
05-17-2010, 03:43 PM
|
||||
|
||||
|
Errr... wha?
I thought the tracking force was the amount of pressure the tone arm has on the LP. What has that to do with the force of the motor driving the mechanics? (We have a nice Dual w/ Shure mag pickup in the main setup, and it has a changer spindle too). Let me go get some detailed snaps and post them... Edit: Styli are TC8G and TC8RS... Apart from some dust, they still look to be in good shape (pics coming...) Last edited by VintagePC; 05-17-2010 at 04:24 PM.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
