Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Antique Radio

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 08-01-2010, 08:25 AM
Reece's Avatar
Reece Reece is offline
VideoKarma Member
 
Join Date: Jul 2004
Location: Cleona, PA
Posts: 2,178
Power problem sounds like an intermittent in the wiring somewhere between the plug and the transformer primary. With it unplugged check with ohmmeter across the power switch turned on and off several times, check all associated wiring for continuity. Wiggle wires while checking with ohmmeter. Switch could be "iffy."

Often a "putt-putt" sound points to a bad cap. You replaced one electrolytic. The other may be "injured." Try jumping another one across it as a test. Be sure to observe + and - on these caps. The designation on the cap can be confusing. The aluminum can is the negative, and the positive is the wire coming out of the insulating disk.

Hum pickup: with volume turned up part way, you should get a hum from speaker by touching center lug of volume control, or grid of the 6SQ7 first audio.

Check all chassis grounds. Are any grounds through a riveted or screwed solder lug? If so shine them up and bridge solder between them and chassis. Sometimes corrosion gets in between the lug and chassis and makes noise.

Get the audio section working first before going on to the radio.
__________________
Reece

Perfection is hard to reach with a screwdriver.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:16 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.