![]() |
|
|
|
#1
|
||||
|
||||
|
I did, thanks. I was able to find a new one after all, so I can return this one to you.
Regards, Phil |
|
#2
|
||||
|
||||
|
Is there a chance to tune or detune the reactance control until the color bars are in sync?
|
|
#3
|
||||
|
||||
|
Quote:
Turning that control while watching the screen, I can change the number of bars but not eliminate them. ![]() I wonder if the frequency is too far off to bring into locking range by that means . . . . Phil |
|
#4
|
|||
|
|||
|
Phil, that adjustment should bring the osc. into sync. See if it will lock in solid, or if it still has 'weak' sync. Bill(oc)
|
|
#5
|
||||
|
||||
|
I'm not entirely sure what you mean by weak sync, but I can get it to lock on a set of horizontal color bands. They don't roll vertically. Moving that adjuster in one direction makes more bands. Moving it in the other direction makes fewer bands. In between the stable points, the bands roll. Continuing in the fewer-bands direction, the adjuster runs out of travel before you reach the Good Place.
Maybe something fishy upstream . . . ? Phil |
| Audiokarma |
|
#6
|
|||
|
|||
|
Phil, what does it do with the original crystal in place?
|
|
#7
|
||||
|
||||
|
Bill, do you have ESP? About 20 seconds ago, I just finished uploading this fresh picture of the TV with original crystal back in place.
![]() Colors aren't perfect, but we're back in the game. I'm not sure what possessed me to try the original crystal, since I was so convinced it was bad. Couldn't think of anything else to try, maybe. I should quit tormenting this poor old thing and just watch a movie for a change ![]() Phil |
|
#8
|
||||
|
||||
|
If I needed it, I wouldn't have sent it to you. Go ahead and keep it.
__________________
Evolution... |
![]() |
| Thread Tools | |
| Display Modes | |
|
|