|
|
|
|
|
#1
09-07-2010, 02:16 PM
|
||||
|
||||
|
What chassis does it have? I just learned that the CTC 15s, 16s and their clones had a lot of intermittent connections on the chroma board. I have a set with the red doing what yours is doing and mine's a 15 clone.
You could also hook up a CRT tester and leave it on red for a while, gently tapping the neck to see if there are any fluctuations in the emission or if the filament flickers.
__________________
My TV page and YouTube channel Kyocera R-661, Yamaha RX-V2200 National Panasonic SA-5800 Sansui 1000a, 1000, SAX-200, 5050, 9090DB, 881, SR-636, SC-3000, AT-20 Pioneer SX-939, ER-420, SM-B201 Motorola SK77W-2Z tube console McIntosh MC2205, C26 
|
|
#2
09-07-2010, 08:03 PM
|
||||
|
||||
|
crt red gun
its a ctc16, when i tap on the neck it flickers, im going to see if the connections are good in the socket, i already sprayed some cleaner in but ill give it another try. im hoping the tube is good, i can do a cataract repair and it should be up and running.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
