|
|
|
|
|
#1
10-12-2010, 09:29 AM
|
||||
|
||||
|
That looks like a '58 to me. Sounds like you need caps in the vertical, it would be best to change them all at this point and the set should work great. The remotes show up on ebay from time to time, it's the first generation, which is gold with 4 buttons. The later remotes will work, they're just not the right ones for the set. The hook with the Zenith logo that protrudes from the front of the set on the left is where the remote hangs when not in use.
__________________
My TV page and YouTube channel Kyocera R-661, Yamaha RX-V2200 National Panasonic SA-5800 Sansui 1000a, 1000, SAX-200, 5050, 9090DB, 881, SR-636, SC-3000, AT-20 Pioneer SX-939, ER-420, SM-B201 Motorola SK77W-2Z tube console McIntosh MC2205, C26 
|
|
#2
10-24-2010, 09:42 PM
|
||||
|
||||
|
Tubes and h and v settings are not going to cut it. As was already mentioned, capacitor replacement is in order. Although tubes can be an issue, most of the issues with sets brought back to life, are with capacitors and to a lesser extent, resistors.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
