|
The two flat caps were C20, .1uf. B- to chassis, and C2 - 944uuf in the tuning area.
I see what you mean about the inside and outside loop of the antenna, but when I opened the set up for the first time, there was only one wire from the outside loop to the tuner terminal. The inside loop terminal appears to have never been soldered to, but I do see from the schematic that it should connect C-1B? I'll try that.
Update: Ahh! Connecting the outside lead to where it was, and attaching the inside loop winding to C-1A fixed all problems! I wonder how the set ever worked before I got it... Now, next task - attach a polarized cord.
__________________
"Ohhh, now you've done it. Now you fudged the bucket and told me too many words to know." - Group X
Last edited by tgunner; 11-04-2010 at 11:09 PM.
|
11-04-2010, 09:14 PM
Hybrid Mode
