how good is this DuMont TV/Stereo?

[Hexar]

BTW, the output has transformers, two single ended transformers, although I was a little disappointed by 50EH5, I was hoping for 6L6 or 6BQ5 maybe. But it is all good.

Here is a schematic diagram of the radio, too bad videokaram does not allow to upload larger files, so I have to shrink it down...

[radiotvnut]

Originally Posted by Hexar

BTW, the output has transformers, two single ended transformers, although I was a little disappointed by 50EH5, I was hoping for 6L6 or 6BQ5 maybe. But it is all good.

Here is a schematic diagram of the radio, too bad videokaram does not allow to upload larger files, so I have to shrink it down...

Some of these low end stereo's actually sounded pretty good for what they are; but, don't expect floor shaking volume. With a 50EH5, you're probably good for around 1-1.5 watts/channel of undistorted power.

Also, use caution when working on the stereo chassis because it is a "hot" chassis. That means that one side of the AC line is connected to the chassis, either directly or thru a capacitor.