another zenith combo

[DaveWM]

brand new yoke tried, no joy.

Oh and putting a convergence coil assy back on the CRT backwards will really foul up the convergence. yikes....

anyway orig yoke back on. My next try will be with the scope on the HOT screen to compare the pin cushion adj wave form to another set.

I guess I could try swapping the convergence board as well, but only if some one here tells me that a convergnce board can cause the screen to be wider a the top by about 1 inch. I will hook up the cross hatch gen and get a pic later to share.

I was really really hoping the yoke would do it.