|
|
|
|
|
#1
05-02-2011, 04:09 PM
|
||||
|
||||
|
I mean the part number given in the Sams manual (C40). 630V should be fine there.
Phil Nelson 
|
|
#3
05-02-2011, 05:39 PM
|
||||
|
||||
|
Just about every old radio or TV that I've owned had at least a few repairs.
Or, perhaps the manufacturer was using up parts that they happened to have in abundance, even though the voltage rating exceeded the specified minimum. They might have gotten a great deal on a boxcar full of 800v-rated caps. Phil Nelson
|
|
#4
05-02-2011, 06:52 PM
|
||||
|
||||
|
Progress!!!
Well if progress means moving backwards. I finished with the caps that I had ordered, but after spending some intimate time with the under side of the set I realized that I missed 7 electrolytics hiding under two metal cans. So they are on order and I await their arrival. I decided to fire the set up again to see what, if any, progress I have made. I fired the set up and... no raster. Moving backwards! I also thought that the flyback transformer was quieter than it was before, although that could be in my imagination. The tubes did light up pretty like a Christmas though.  I didn't spend much time trying to figure out where I went wrong. I figure I'll have some time in the next few days before the new caps get here. BTW thanks so much for all of your help Phil.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
