Prototype set is here

[miniman82]

Originally Posted by John Folsom

Later on, it became obvious that additional electrical isolation was needed between the convergence pin at 3-4KV and the other pins, so a 20 pin stem and base were developed, allowing 3 blank pin locations on either side of the convergence electorde.

Makes perfect sense.

Hey, speaking of convergence...

This thing has a long string of megohm resistors coming off the HV rectifier, with the convergence pot right in the middle and more resistors after it. It looks electrically just like the way it was done on the CT-100, except by that time they actually had a 50meg resistor to use in the circuit. What do your proto sets have for convergence?