Rechecked every connection against Phil's schematic with special attention to the tube and the RF coil. The coil is exactly as originally described by Phil, and it included a diagram showing the red spot and the terminal numbering. Recorded voltages at pins 1-8 and rechecked the continuity across every accessible connection. Also verified that each component is the correct value. Then I followed Phil's suggestion--made my own schematic directly from my own appliance. This is what I came up with:
Variations from original schematic are (1) C3 and C4 68mfd, (2) fuse, and (3) rotary switch for C6a/b/c.
Any glaring errors?
- Winky
08-20-2011, 01:22 AM
Hybrid Mode
