|
There is .47 cap in series with the yoke. the resistance at yoke is about 15 ohms and the resistance of the trans is about 11 ohms seems good to me. If i jump the cap, the line moves to the left a bit so I believe the yoke is good at present. The cap provides DC isolation for centering purposes. I still suspect the transformer; but is is so strange to be able to provide enough fillament and voltage (albeit low) to the HV rect to give a light on the screen. Lifted the width coil to check the readings while I was at it.
|
09-07-2011, 01:23 PM
Threaded Mode