Quote:
Originally Posted by vts1134
...(CRT) cathode reads +195V, which I see is a little low so I took a measurement where it should read +425V and it only got +350V. It's right on the 20% mark but it looks like I'll be going resistor hunting at some point to address that.
|
Actually the exactitude of these voltages is not all that important as long as you have a bright, in-focus pic and the brightness control has proper range. Having the proper bias relationship between K and G1 is what's important, not so much the voltages themselves relative to ground.
02-12-2012, 05:23 PM
Hybrid Mode
