![]() |
|
|
|
#1
|
||||
|
||||
|
Ive seen this. Video input (scaler board)
Bad lytics. Small SMD silver can types. Most likely around the processor with the heat sync are the ones bad. Take a can of freeze spray and hit them when warmed up, or a hair dryyer when started up cold. Watch the pic come in clear in all its glory. Panasonic scalers are known for this problem, especially in the Maxent models. Good luck
__________________
Honey, turn on the tv.. I'm cold! |
![]() |
| Thread Tools | |
| Display Modes | |
|
|