|
|
|
#5
03-14-2012, 10:16 PM
|
||||
|
||||
|
whoever restored it likely put in a solid state replacement for the vibrator.
The intermittent could be anything, and may not be because the guy who repaired it did a bad job. For 350 I would expect he replaced all the capacitors, aligned it, and replaced the vibrator, tested tubes, etc. Could be a bad solder joint or connection, a bad tube (not too likely), a shorting mica cap in an IF can, etc. 
|
| Audiokarma |
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode