need help

[bob91343]

Just accumulate knowledge and experience. Nothing else will do.

I too can diagnose without seeing the gear; I have done it many times. And yes, I can tell the function of each part, and even critique the design. And make suggestions for change.

Electronics has been my hobby and vocation for 70 years or so. I am always learning something new.

[radio nut]

Originally Posted by bob91343

Just accumulate knowledge and experience. Nothing else will do.

I too can diagnose without seeing the gear; I have done it many times. And yes, I can tell the function of each part, and even critique the design. And make suggestions for change.

Electronics has been my hobby and vocation for 70 years or so. I am always learning something new.

Well, the multi section bar resistor had a bad section so I replaced that, bypassed the audio filter and The radio plays well. I showed my friend who owns it your posts and he is allowing me to leave the audio filter bypassed. He did this because of your reply and the other videokarma member's opinion. I have 2 more radios to work on for him so I will document the diagram with what I have done so a future generation will understand my work years from now. But I would like to say thanks for your assistance on this project. Thanks to everyone who assists on any posting I put up.