1981 Magnavox with a problem.

[legenbass77]

I also have the same question as Firebird with my 1977 T-995 chassis regarding replacing the 4 lead safety cap with a 2 lead orange drop cap on the retrace module. Do I just bridge the solder pads, or re-route the 2 leads a certain way? Schematic shows each lead goes to separate pins on one module socket. Pins 8,9,11,12 with a silicon diode across pins 8, and 12. I'm wanting to replace the 4 lead cap on my set for increased reliability after reading how they can fail, and destroy the crt. As far as I know it is the original one, and being 35 years old it could go bad any minute. Mine shows part 250563-11 which cross references to a .0086 mfd @1600 volts. The 250563-18 cross references to a .0135 mfd @1600 volts.