Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Solid State CRT Televisions

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 05-10-2012, 12:10 PM
DavGoodlin's Avatar
DavGoodlin DavGoodlin is offline
Motorola Minion
 
Join Date: Aug 2011
Location: near Strasburg PA
Posts: 3,497
I recall an issue with solder joints on these sets. If you have HV, but no sound, that points to a "power supply" voltage common to both audio and video.

The key thing to remember is that not all power supply voltages come from a resistor (or voltage ladder) off the main power supply from the power transformer.

Many of these lower voltages are derived from a winding tap on the flyback, that feed a rectifier diode and finally a smaller value electrolytic cap. See if you have DC on the cathodes of any rectifier diodes fed from the flyback. Often, there is a low value or "fuse" resistor in series there.

I do not have the schematic on a set this new, but I could point it right out if someone could post it.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:58 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.