New 9-PC-41 owner

[cbenham]

Originally Posted by reeferman

Also at the top of my list is checking the CRT. It is the original with a '48 date code. If it is no good, end of project, Ebay time.
I would really like to get it going. It may be a while before I get back with updates/questions.
Thanks again
Phil

These CRTs are most times OK. You may notice a brown looking 4X3 raster burn on the face of the tube. The tube will still make a bright image even so. Occasionally you will find a burned streak or spot near the center of the screen indicating a sweep failure that somehow occurred without shutting down the beam current to the tube. The tube will still probably make a bright picture and will serve well until you find a nice, clean one through this forum or elsewhere. I hope it's good and you make the set 'sing' again.
Regards,
Cliff