![]() |
|
#7
|
||||
|
||||
|
I'd, with a B&W picture, turn the blue down to min then balance the remaining two controls for true yellow then crank the blue back up until a true white is obtained. I use this procedure on tube type equip so YMMV.
If the B&W image is already tinted badly then what do you have to loose?
__________________
Tom C. Zenith: The quality stays in EVEN after the name falls off! What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4 |
| Thread Tools | |
| Display Modes | |
|
|