|
OK, the flyback is confirmed bad. After not finding any obvious shorts in the HOT circuit and with any of the sources that come off the flyback, I substituted a standard 100 watt light bult in place of the B+ fuse. The result was that the bulb lit up brightly; which, indicates a short. I then removed the flyback for testing on my Sencore flyback tester and it failed the ring test.
So, the hunt is on for a good flyback for this set. There is no part number on the flyback; but, the chassis number is E32-4 and it's in Sam's number 2034-1. If anyone can get me a part number or a good flyback, I'd appreciate it.
|
09-24-2012, 08:05 PM
Hybrid Mode
