uratech 5inch b&w transistor tv

[ctc17]

ohhh my dearest timmy..
I know its about the challenge, but I ebayed 5 inch tv and came up with several for $.01.
Now; if you time is worth.....say $5 and hour hmmm

Probably a resistor, surface mouth regulator or choke that failed...

[timmy]

Originally Posted by ctc17

ohhh my dearest timmy..
I know its about the challenge, but I ebayed 5 inch tv and came up with several for $.01.
Now; if you time is worth.....say $5 and hour hmmm

Probably a resistor, surface mouth regulator or choke that failed...

i know its junk but it helps me stay somewhat sharp and besides it dont need a flyback after all but i cant seem to find what failed, no visible burned resistors, it dont have a regulator,i am thinking one of those little green poly caps since i changed ALL the electrolytics after finding one bad one. i did get a picture and sound but the signal seem to fade in and out and had 3 images so the jumper i had done seems to be leaving out a certain part of the overall circuit, the 3 images and the sound fading. am i correct in saying that not all glass zeners test one way that some do pass voltage the other way testing in the diode test of a digital vom?