|
|
|
|
|
#1
11-29-2012, 05:47 PM
|
|||
|
|||
|
for you fluid dynamics types, I assume a smaller opening on the bottom near the base and a larger opening on the top would work best? I am thinking of about a 2" round opening near the base and a 3" opening on the top.
|
|
#2
11-29-2012, 06:24 PM
|
|||
|
|||
|
after 1 hr it was at 140f, too hot for me, so I placed a 3" 12v fan on a 9v battery right at the base, within minutes it was down to 100f so looks like I will stick with forced air cooling. I have some other sets that have much harder to come by flys that will also get the treatment.
5 more min and its down to the low 90's wow... will be interesting to see it spike when I turn off the set (and remove the power from the fan). Last edited by DaveWM; 11-29-2012 at 06:29 PM.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
