Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 12-02-2012, 02:07 PM
Eric H's Avatar
Eric H Eric H is offline
Administrator
 
Join Date: Jun 2002
Location: So. Calif
Posts: 11,565
On the Raytheon I didn't measure the HV prior to the transformer failing, however after I cleaned and recoated it it was obvious to the naked eye that the set had more HV, it was brighter and had less blooming.
Of course in that case it had been running on the edge of failure to start with so the "After" was probably running closer to spec.

I have a Philco that someone has transplanted what looks like a Hallicrafters HV assembly in to it, I could never get it to run reliably though, I might take another crack at it someday.
Reply With Quote
  #2  
Old 12-03-2012, 02:49 PM
DavidGoncalv's Avatar
DavidGoncalv DavidGoncalv is offline
VideoKarma Member
 
Join Date: Mar 2009
Location: Lexington, MA
Posts: 76
For the folks that have HV output issues, I wonder if they could monitor the RF frequency over time and see if it shifts.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:36 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.