flyback cooling

[DaveWM]

I think I got it worked out.

I cut a third hole this time on the fly cage side next to the side of the cabinet, I can stack two of the mini fans in there and get them pointed right at the flyback, about 1" away from the tire. the fans suck air thru a very tight dead space, but there is at least a 3/4 inch space so they are not starved off and the back can go back on.

The down side is the fans are very noisy so I will have to see if I can do anything about that. I would love to get the 3" fan back on the side I just dont think I can get it to fit and still be able to install the cage.